LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2009 >> Borrego Limited, 4WD >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Ignition Switch Assembly >> Repair Procedures >> Inspection

Repair Procedures: Inspection

Fig 1: Identifying Ignition Switch Connector & Key Warning Switch Connector
G06365732Courtesy of KIA MOTORS AMERICA, INC.
  1. Disconnect the ignition switch connector and key warning switch connector from the steering lock body assembly.
  2. Check for continuity between the terminals.
  3. If continuity is not specified, replace the switch.
Fig 2: Ignition Switch Continuity Chart
G06365733Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals