LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2008 >> Spectra5 2.0 1, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle System ( A4CF2) >> Automatic Transaxle Control System >> Output Speed Sensor >> Removal

Output Speed Sensor: Removal

  1. Remove the battery terminal.
  2. Remove the battery and battery tray.
  3. Remove the air duct.
  4. Remove the air cleaner assembly. Refer to AUTOMATIC TRANSAXLE-REMOVAL/INSTALLATION  procedures.
  5. Remove the output shaft speed sensor connector (A).
    Fig 1: Locating Output Shaft Speed Sensor Connector (A)
    G04864721Courtesy of KIA MOTORS AMERICA, INC.
  6. Remove the output shaft speed sensor (A).
    Fig 2: Identifying Output Shaft Speed Sensor (A)
    G04864722Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals