LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2008 >> Spectra5 2.0 1, Automatic >> Repair and Diagnosis >> Brakes >> Abs/TCS (Anti Lock/Traction Control) >> Abs (Anti-Lock Brake System) >> Troubleshooting >> Hi-Scan (Pro) Check

Hi-Scan (Pro) Check

  1. Turn the ignition switch OFF.
  2. Connect the Hi-scan (pro) to the 16P data link connector located behind the driver's side kick panel.
    Fig 1: Identifying Data Link Connector
    G00332818Courtesy of KIA MOTORS AMERICA, INC.
  3. Turn the ignition switch ON.
  4. Check for diagnostic trouble codes using the Hi-scan (pro).
  5. After completion of the repair or correction of the problem, erase the stored fault codes using the clear key on the Hi-scan (pro).
  6. Disconnect the Hi-scan (pro) from the 16P data link connector.
scientia non olet · About LEMON Manuals