Abs/TCS (Anti Lock/Traction Control)
- Abs (Anti-Lock Brake System)
- Components
- Description
- System Function
- Warning Lamp Control
- Bleeding Brake System
- HECU Connector Input/Output Specification (Abs & TCS)
- Troubleshooting
- Inspection Procedure For Trouble Symptoms
- Abs Does Not Operate
- Abs Does Not Operate Intermittently
- Communication With Hi-Scan (Pro) Is Not Possible (Communication With Any System Is Not Possible)
- Communication With Hi-Scan (Pro) Is Not Possible (Communication With Abs Only Is Not Possible)
- The Abs Warning Lamp Does Not Light Up (Engine Off), When Ignition Key Is Turned On
- The Abs Warning Lamp Remains On, Even After The Engine Is Started
- Brake Warning Lamp Is Abnormal
- Inspection Procedures For Diagnostic Trouble Codes
- Notes
- Diagnostic Trouble Code Chart
- DTC C1101, 1102: Battery Voltage Out Of Range
- DTC C1200, C1203, C1206 & C1209: Wheel Speed Sensor Open Or Short To Ground
- DTC C1201, C1204, C1207 & C1210: Wheel Speed Sensor Signal Malfunction
- DTC C1202, C1205, C1208 & C1211: Wheel Speed Sensor Signal Malfunction
- DTC C1604 & C2380: Ecu Hardware Failure
- DTC C2112: Valve Relay Failure
- DTC C2402: Motor Relay
- DTC C1503: TCS Switch Failure
- DTC C1605: Can Hardware Failure
- DTC C1610: Can Bus Off Failure
- DTC C1611: Ems Time-Out Failure
- DTC C1612: TCM Time-Out Failure
- DTC C1613: TCM Wrong-Matched Transmission Failure
- DTC C2227: Brake Disc Overheat
- Traction Control System
- EBD (Electronic Brake-Force Distribution)
- Removal & Installation