LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2008 >> Sorento Base, A5SR1 >> Repair and Diagnosis >> Engine Performance >> Tune-Up >> Ignition System >> Removal >> Ignition Coil

Ignition Coil

  1. Remove the engine cover.
  2. Disconnect the ignition coil connector (A).
    Fig 1: Identifying Engine Cover And Ignition Coil Connector
    G05118177Courtesy of KIA MOTORS AMERICA, INC.
    NOTE: When removing the ignition coil connector, pull the lock pin (A) and push the clip (B).
    Fig 2: Identifying Ignition Coil And Clip
    G04803991Courtesy of KIA MOTORS AMERICA, INC.
  3. Remove the ignition coil (B).
  4. Installation is the reverse of removal.
scientia non olet · About LEMON Manuals