LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2008 >> Sorento Base, A5SR1 >> Repair and Diagnosis >> Electrical >> Body Electrical >> Body Electrical System >> Immobilizer Control System >> DTC P1697 Hi-Scan Message Error >> Monitor DTC Status

Monitor DTC Status

  1. Connect scan tool to Data Link Connector (DLC).
  2. Ignition "ON" & engine "OFF".
  3. Select "Diagnostic Trouble Codes (DTCs)" mode and monitor "DTC Status" parameter
  4. Is the DTC B1697 present?

    YES  : Go to next procedure.

    NO  : Fault is intermittent caused by poor contact in SMARTRA's and/or ECM's connector or was repaired and ECM memory was not cleared. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.

scientia non olet · About LEMON Manuals