LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2008 >> Sedona Base >> Repair and Diagnosis >> Accessories & Equipment >> Warning Systems >> Back Warning Light >> Ultrasonic Sensor >> Replacement

Ultrasonic Sensor: Replacement

  1. Remove the rear bumper. Refer to REAR BUMPER .
  2. Disconnect the sensor connector at the inside of the rear bumper (C), and then remove the sensor (B) from the housing (A).
    Fig 1: Identifying Sensor, Housing And Rear Bumper
    G04885268Courtesy of KIA MOTORS AMERICA, INC.
  3. Installation is the reverse of removal procedure.
scientia non olet · About LEMON Manuals