LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2008 >> Sedona Base >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Power Sliding Door System >> Power Sliding Door Control Module (PSDM) >> Replacement

Power Sliding Door Control Module (PSDM): Replacement

  1. Disconnect the negative (-) battery terminal.
  2. Remove the rear trim panel. Refer to INTERIOR TRIM .
  3. Remove the connectors and mounting bolts (2EA) from the power sliding door unit (A). And then remove the power sliding door control module (B).

    TORQUE: 0.025-0.035 N.m (0.0025-0.0035 kg.m)

    Fig 1: Identifying Power Sliding Door Unit And Control Module
    G04884986Courtesy of KIA MOTORS AMERICA, INC.
  4. Installation is the reverse of removal.
    WARNING:
    • A learn cycle must be performed whenever the power is removed.
    • Check the normal operation whenever a power sliding door component is removed or replaced. If the chime sound is heard, check the DTC, wiring harness and cable connections.
scientia non olet · About LEMON Manuals