LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2008 >> Rio Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Windshield Wiper/Washer) >> Front Wiper Motor >> Inspection >> Automatic Stop Operation Check

Automatic Stop Operation Check

WARNING: This page is about a different car, the 2008 Kia Optima and 2008 Kia Magentis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Operate the motor at low speed using the stalk control.
  2. Stop the motor operation anywhere except at the off position by disconnecting terminal 6.
  3. Connect terminals 3 and 6.
  4. Connect the positive (+) lead from the battery to terminal 2 and the negative (-) lead to terminal 5.
  5. Check that the motor stops running at the off position.
    Fig 1: Checking Wiper Motor Automatic Stop Operation
    G04806544Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals