Rear Disc Brake: Removal

WARNING: This page is about a different car, the 2007 Kia Sedona and 2006 Kia Sedona. However, it is still accessible from the selected car via links, so may be relevant.

Raise the rear of the vehicle and make sure it is securely supported. Remove the rear wheel.
Remove the guide rod bolt (B), After raising the caliper assembly (A), support it with a wire.

Fig 1: Identifying Guide Rod Bolt And Caliper Assembly
Courtesy of KIA MOTORS AMERICA, INC.
Remove pad shim (A), pad retainer (B) and pad assembly (C) in the caliper bracket.

Fig 2: Identifying Pad Shim And Pads
Courtesy of KIA MOTORS AMERICA, INC.