LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2008 >> Optima EX, 2.7 4 >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - Fuel System (G6EA-GSL 2.7L) >> CVVT Oil Temperature Sensor (OTS) >> Inspection >> Component Inspection

Component Inspection

  1. Turn ignition switch OFF.
  2. Disconnect OTS connector.
  3. Remove the OTS.
  4. After immersing the thermistor of the sensor into water (or engine coolant), measure resistance between OTS terminals 1 and 2.
    Fig 1: Measuring Resistance Between OTS Terminals
    G04804505Courtesy of KIA MOTORS AMERICA, INC.
  5. Check that the resistance is within the specification.

    Specification: Refer to SPECIFICATION .

scientia non olet · About LEMON Manuals