LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2008 >> Magentis 2.7 4 >> Repair and Diagnosis >> Accessories & Equipment >> Warning Systems >> Back Warning System >> Ultrasonic Sensor >> Replacement

Ultrasonic Sensor: Replacement

  1. Disconnect the negative (-) battery terminal.
  2. Remove the rear bumper. Refer to REAR BUMPER .
  3. Disconnect the sensor connector at the inside of the rear bumper, and then remove the sensor (B) from the housing (A).
    Fig 1: Identifying Sensor And Housing
    G04806703Courtesy of KIA MOTORS AMERICA, INC.
  4. Installation is the reverse of removal procedure.
scientia non olet · About LEMON Manuals