LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2008 >> Magentis 2.4 3 >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Automatic Transaxle System) >> DTC P0717 Input Speed Sensor Circuit - No Signal >> Verification Of Vehicle Repair

Verification Of Vehicle Repair

WARNING: This page is about a different car, the 2007 Kia Optima, 2007 Kia Magentis, 2006 Kia Optima, and 2006 Kia Magentis. However, it is still accessible from the selected car via links, so may be relevant.

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect scan tool and select "Diagnostic Trouble Codes (DTCs)" mode.
  2. Using a scan tool, Clear DTC.
  3. Operate the vehicle within DTC Enable conditions in General information.
  4. Is resistance within specification?

    YES  : --> Go to the applicable troubleshooting procedure.

    no  : --> System performing to specification at this time.

scientia non olet · About LEMON Manuals