LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2008 >> Magentis 2.4 3 >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Automatic Transaxle System) >> DTC P0707 Transaxle Range Switch - Low Input >> Terminal & Connector Inspection

Terminal & Connector Inspection

WARNING: This page is about a different car, the 2007 Kia Optima, 2007 Kia Magentis, 2006 Kia Optima, and 2006 Kia Magentis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Many malfunctions in the electrical system are caused by poor harness and terminals. Faults can also be caused by interference from other electrical systems, and mechanical or chemical damage.
  2. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage.
  3. Has a problem been found?

    YES  : --> Repair as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure.

    no  : --> Go to "POWER CIRCUIT INSPECTION " procedure.

scientia non olet · About LEMON Manuals