DTC P0335 Crankshaft Position Sensor A Circuit: DTC Detecting Condition

DTC DETECTING CONDITION AND POSSIBLE CAUSE

Item		Detecting Condition	Possible Cause
DTC Strategy		Check camshaft signal switching	Open or short in signal, ground or power supply circuit Contact resistance in connectors Damage to the connecting flange/flywheel Misadjusted crankshaft and camshaft pulley position Faulty CKP sensor
Enable Conditions		10V < Battery voltage < 16V No relevant failure
Threshold Value	Case1)	No crankshaft teeth during 4 camshaft signal transition
	Case2)	Crankshaft Teeth detected but synchronization not successful
	Case 3)	No signal or Number of Crankshaft Teeth within one revolution is abnormal.)
Diagnosis Time	Case1)	2 revolutions
	Case2)	2 revolutions
	Case 3)	2.5 revolutions
Mil On Condition		2 Driving Cycles