DTC P0606 ECM/Pcm Processor (ECM-Self Test Failed): DTC Detecting Condition

DTC DETECTING CONDITION AND POSSIBLE CAUSE

Item		Detecting Condition
DTC Strategy		Controller Malfunction - Check failure of controller operation
Case 1)	Enable Conditions	10V < Battery voltage < 16V
	Threshold Value	Maximum waiting time for initialization after ignition key ON: 60 seconds
	Diagnosis Time	60 sec.
Case 2)	Enable Conditions	No electrical fault of WRAF sensor
	Threshold Value	Maximum communication error counter: 2
	Diagnosis Time	1 sec.
Mil On Condition		2 Driving Cycles