LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2007 >> Spectra5 2.0 2, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> DTC Troubleshooting Procedures >> Inspection Chart For Diagnostic Trouble Codes (DTC) >> DTC P0101 Mass Or Volume Air Flow Circuit Range/Performance >> Component Inspection >> Overview

Component Inspection: Overview

  1. Engine "ON".
  2. Install scan tool and monitor the "MASS AIR FLOW" parameter on the scan tool data list.

    Specification : Approx. 0.6 ~ 1.0V at idle and No load

  3. Is MAF sensor voltage near the specified value?

    YES 

    • Check for poor connection between PCM and component: backed out terminal, improper mating, broken locks or poor terminal to wire connection. Repair as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure.

    NO 

    • Check MAF for contamination, deterioration, or damage. Substitute with a known-good MAF and check for proper operation. If the problem is corrected, replace MAF and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.
scientia non olet · About LEMON Manuals