LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2007 >> Spectra5 2.0 2, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> DTC Troubleshooting Procedures >> Inspection Chart For Diagnostic Trouble Codes (DTC) >> DTC P0036 Ho2S Heater Control Circuit (Bank 1 / Sensor 2) >> Control Circuit Inspection

Control Circuit Inspection

  1. Measure voltage between terminal 4 of the HO2S heater harness connector and chassis ground.

    Specification : Approx. 4~5V

  2. Is voltage within the specification?

    YES 

    • Go to next step as below.

    NO 

    NOTE: HO2S must have a clean air reference to function properly. The air is obtained by way of the sensor wire(s). Do not attempt to repair the wire(s), connector, or the terminals.
scientia non olet · About LEMON Manuals