Automatic Transaxle Control System: Installation
- Install the solenoid valve.CAUTION: Apply the ATF oil or White Vaseline to the O-ring not to be damaged.
- Connect the solenoid valve connector to the valve body.CAUTION: When connecting the solenoid valve connector, check the connector for rust, dirt, or oil, then reconnect it.
- Remove the valve body.
TORQUE: 10~12 Nm (100~120 kgf.cm, 7~8 lb-ft)
- Install the oil filter.
TORQUE: 10~12 Nm (100~120 kgf.cm, 7~8 lb-ft)
- Continue to apply liquid gasket at application points at the oil pan with ø2.5 mm (0.098 in.) thickness.
Liquid gasket Part name: Threebond 1281B
- Tighten the mounting bolt with the specified torque after installing the oil pan.
TORQUE: 10~12 Nm (100~120 kgf.cm, 7~8 lb-ft)
- Install the drain plug.
TORQUE: 35~45 Nm (350~450 kgf.cm, 25~32 lb-ft)
- Installation is the reverse of the removal.