LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2007 >> Sorento Base, A5SR2 >> Repair and Diagnosis >> Electrical >> Body Electrical >> Body Electrical System >> Back Warning System >> Ultrasonic Sensor >> Operation Principle >> Removal

Operation Principle: Removal

  1. Remove the rear bumper. Refer to the Rear bumper in the BODY (INTERIOR AND EXTERIOR) .
  2. Disconnect the sensor connector at the inside of the rear bumper (C), and then remove the sensor (B) from the housing (A).
    Fig 1: Identifying Sensor And Housing
    G04885268Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals