DTC C1611 Can Time-Out Ems: DTC Detecting Condition

POSSIBLE CAUSE REFERENCE

Item	Detecting Condition	Possible cause
DTC Strategy	CAN massage monitoring	Inoperative PCM (ECM) Inoperative HECU Bad connection of PCM, open or short circuit in PCM line.
Monitoring Period	Continuous
Enable Conditions	Faults are detected if PCM (ECM) message was not received or EMS CAN message is abnormal on time by the CAN controller of HECU.
Fail Safe	Inhibit the ESC control and ABS/EBD control is available.