LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2007 >> Sedona Base >> Repair and Diagnosis >> Accessories & Equipment >> Memory Modules >> IMS (Integrated Memory System) >> IMS Power Seat Control >> Operation >> Preset Recall Operation By Keyless

Preset Recall Operation By Keyless

  1. When IG is off (CAN BUS data IG transmitted from IPM is "off") and a key is removed (CAN BUS data Key Reminder Switch transmitted from IPM is "off1"), and if "ID1" or "ID2" is received during keyless unlock operation, it automatically adjusts seat and pedal positions as memorized in keyless code (there is no buzzer output during preset recall operation by keyless). However, seat slide adjustment position is determined as follows, depending on Auto switch.
    • When auto switch is on ("IMS Auto Switch" is "on"), the position is automatically adjusted to 50 mm farther back than target position, and if a key is inserted ("Key Reminder Switch" changes from "off" to "on"), it conducts Get-on gearing operation to a target preset recall position.
    • If auto switch is off ("IMS Auto Switch" is "off"), it moves to the target memory play position.
  2. Any one of the following conditions will prevent preset recall operation.
    • When "P" position switch is not on.
    • When Vehicle Speed in CAN BUS data transmitted from cluster is "3km/h" or faster.
    • When seat and pedal is manipulated by CAN BUS and manual switch.
    • When IG Switch transmitted from IPM is other than off.
    • When a key is inserted.
  3. Playing will be halted during preset recall operation if any of the following conditions is met.
    • When "P" position switch is not on.
    • When vehicle speed in CAN BUS data transmitted from cluster is "3km/h" or faster.
    • When seat and pedal is manipulated by CAN BUS and manual switch.
scientia non olet · About LEMON Manuals