LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2007 >> Sedona Base >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Cruise Control Main Switch >> Inspection >> Measuring Resistance

Measuring Resistance

  1. Disconnect the cruise control switch connector from the control switch.
    Fig 1: Identifying Cruise Control Switch Connector Terminal
    G04882126Courtesy of KIA MOTORS AMERICA, INC.
  2. Measure resistance between terminals on the control switch when each function switch is ON (switch is depressed).
    CONNECTOR TERMINAL RESISTANCE SPECIFICATIONS

    Function switch Terminal Resistance
    Cruise Main RH 1-2 3.9 kΩ ± 1%
    Cancel RH 1-3 0 Ω ± 1%
    Set/Coast RH 1-3 220 Ω ± 1%
    Resume/Accel RH 1-3 910 Ω ± 1%
  3. If not within specification, replace switch.
scientia non olet · About LEMON Manuals