Burglar Alarm
- Basic Concept
- The following functions are related to the RKE and burglar alarm systems..
- Door locking
- Door unlocking
- PSD open/close (both for left and right)
- PTG open/close
- Panic
- If IGN key is inserted into the key cylinder, the RKE transmitter functions are inoperative..
- Door locking by RKE signal:
- Whenever this signal is received, door LOCK pulse is always issued.
- Hazard lamp flashes one time for 1 second depending on the burglar alarm state.
- This signal will make the system possible to enter into the ARM state (or PREARM state depending on the vehicle condition).
- Door unlocking by RKE signal.
- Whenever this signal is received, door UNLOCK pulse is always issued.
- Hazard lamp flashes two times whenever the key fob unlock signal is received.
- This signal will make the system possible to enter into the DISARM or 30sec DELAY state depending on Condition A is true or not.
- LH or RH PSD open/close by RKE signal.
- Only with the information received by RKE, the burglar alarm system cannot distinguish the OPEN signal from CLOSE signal.
- RAM will pass this signal to LH PSD and RH PSD then the burglar alarm state is decided depending on the vehicle condition.
- PTG open/close
- Only with the information received by RKE, the burglar alarm system cannot distinguish the OPEN signal from CLOSE signal.
- RAM will pass this signal to PTG module then the burglar alarm state is decided depending on the vehicle condition.
- Panic by key fob
- Whenever this signal is received, the PANIC function is activated (unless the system is already in an ALARM state).
- Mechanical key on the driver door, assist door and tail gate door
- It is possible to ARM or DISARM the system.
- Functional Diagram
Courtesy of KIA MOTORS AMERICA, INC.