LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2007 >> Sedona Base >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> DTC Troubleshooting Procedures (2 Of 2) >> DTC P2A00 O2 Sensor Not Ready (Bank 1 / Sensor 1) >> DTC Description

DTC Description

Checking output signals from B1S1 every 12 sec. under detecting condition, if an output signal is near 3.5V for more than 10 sec, PCM sets P2A00. MIL (Malfunction Indication Lamp) turns on.

scientia non olet · About LEMON Manuals