LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2007 >> Sedona Base >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> DTC Troubleshooting Procedures (2 Of 2) >> DTC P2127 Throttle/Pedal Position Sensor/Switch "E" Circuit Low Input >> Power Circuit Inspection

Power Circuit Inspection

  1. IG "OFF".
  2. Disconnect APS connector.
  3. IG "ON" & ENG "OFF".
  4. Measure voltage between terminal 3 of APS harness connector and chassis ground.

    Specification: Approx. 5V

  5. Is the measured voltage within specification?

    YES 

    NO 

scientia non olet · About LEMON Manuals