LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2007 >> Sedona Base >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> DTC Troubleshooting Procedures (2 Of 2) >> DTC P1106 Manifold Absolute Pressure Sensor Circuit Short - Intermittent High Input >> Monitor SCANTOOL Data

Monitor SCANTOOL Data

  1. Connect scantool to Data Link Connector (DLC)
  2. Warm up engine to normal operating temperature
  3. Monitor "MAPS" parameter on the scantool.
    Fig 1: Scan Tool Display Screen - Mass Air Flow
    G04883552Courtesy of KIA MOTORS AMERICA, INC.
  4. Is the current data displayed correctly?

    YES 

    • Fault is intermittently caused by poor contact in the sensor and/or PCM connector or non cleared PCM memory after repair. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace if necessary and go to "VERIFICATION OF VEHICLE REPAIR ".

    NO 

scientia non olet · About LEMON Manuals