LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2007 >> Rondo EX, 2.7 4 >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Automatic Transaxle Control System (A5GF1) >> Output Speed Sensor >> Description

Output Speed Sensor: Description

OUTPUT SPEED SENSOR DESCRIPTION

Sensor type
  1. Type : HALL SENSOR
  2. Output voltage : DC 12V
  3. Current consumption : 22 mA (Max)
Function
  1. Output shaft speed sensor: Detect the output shaft RPM (T/F GEAR RPM) at the T/F drive gear
  2. Feedback control, clutch-clutch control, damper clutch control, incorrect ratio control and sensor trouble detection signal.
Connector
G05116852Courtesy of KIA MOTORS AMERICA, INC.
Fig 1: Identifying Output Shaft Speed Sensor
G04864716Courtesy of KIA MOTORS AMERICA, INC.
INSPECTION ITEM AND STANDARD VALUE

Item Inspection item Standard value
Air gap Output shaft speed sensor 0.0335 in. (0.85 mm)
Sensor resistance Output shaft speed sensor Over 1 MΩ
Output voltage HIGH Over 4.8V
LOW Below 0.8V
scientia non olet · About LEMON Manuals