LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2007 >> Rondo EX, 2.7 4 >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Gasoline Engine Control System (G6EA - GSL 2.7L) >> Engine Coolant Temperature Sensor (ECTS) >> Inspection >> Component Inspection

Component Inspection

  1. Turn ignition switch OFF.
  2. Disconnect ECTS connector.
  3. Remove the ECTS.
  4. After immersing the thermistor of the sensor into engine coolant, measure resistance between ECTS terminals 1 and 3.
    Fig 1: Measuring Resistance Between ECTS Terminals 1 And 3
    G05185979Courtesy of KIA MOTORS AMERICA, INC.
  5. Check that the resistance is within the specification.

    Specification: Refer to SPECIFICATION .

scientia non olet · About LEMON Manuals