LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2007 >> Rondo Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle System (F4A42) >> Automatic Transaxle System >> DTC P0733 Gear 3 Incorrect Ratio >> Monitor SCANTOOL Data

Monitor SCANTOOL Data

  1. Connect scantool to data link connector (DLC).
  2. Engine "ON".
  3. Monitor the "ENGINE SPEED, INPUT SPEED SENSOR, OUTPUT SPEED SENSOR, GEAR POSITION" parameter on the scantool.
  4. Disconnect the solenoid valve connector and perform the "STALL TEST".

    Specification : 2100~2800 engine RPM

    Fig 1: Scantool Display - Shift Position
    G05186380Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals