Shock Absorber: Installation

Install the rear shock absorber (B) to the wheel housing panel by tightening the bracket mounting bolts (A).
Tightening torque N.m (kgf.m, lb-ft):

45-55 (4.5-5.5, 33-40)

Fig 1: Identifying Rear Shock Absorber Bracket Mounting Bolts
Courtesy of KIA MOTORS AMERICA, INC.
Connect the rear shock absorber (A) with the carrier assembly and then tighten the bolt and nut (B).
Tightening torque N.m (kgf.m, lb-ft):

140-160 (14.0-16.0, 101-116)

Fig 2: Identifying Rear Shock Absorber Assembly Nuts And Bolts
Courtesy of KIA MOTORS AMERICA, INC.
Install the rear wheel and tire.
Tightening torque N.m (kgf.m, lb-ft):

90-110 (9.0-11.0, 65-80)

CAUTION: Be careful not to damage the hub bolts when installing the rear wheel and tire.