LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2007 >> Rondo Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Automatic Transaxle Control System (A5GF1)) >> Transaxle Range (Tr) Switch >> Removal

Transaxle Range (Tr) Switch: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the battery terminal.
  2. Remove the battery and battery tray.
  3. Remove the air cleaner assembly (Refer to AUTOMATIC TRANSAXLE ).
  4. Disconnect the inhibitor switch connector (A).
    Fig 1: Locating Inhibitor Switch Connector
    G05116861Courtesy of KIA MOTORS AMERICA, INC.
  5. Remove the control cable (A) from the manual control lever.
    Fig 2: Locating Control Cable
    G05116862Courtesy of KIA MOTORS AMERICA, INC.
  6. Remove the inhibitor switch (A) and manual control lever (B).
    Fig 3: Removing Inhibitor Switch And Manual Control Lever
    G05116863Courtesy of KIA MOTORS AMERICA, INC.