LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2007 >> Rondo Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Automatic Transaxle Control System (A5GF1)) >> Transaxle Oil Temperature Sensor >> Removal

Transaxle Oil Temperature Sensor: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the battery terminal.
  2. Lift the vehicle.
  3. Remove the splash shield.
  4. Loosen the drain plug and drain the transaxle oil.
  5. Remove the oil pan. (Refer to AUTOMATIC TRANSAXLE )
  6. Disconnect the oil temperature sensor connector and remove the sensor (A) from the valve body.
    Fig 1: Identifying Oil Temperature Sensor
    G05116856Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals