LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2007 >> Rondo Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Automatic Transaxle Control System (A5GF1)) >> Input Speed Sensor >> Removal

Input Speed Sensor: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the battery terminal.
  2. Remove the battery and battery tray.
  3. Remove the air cleaner assembly. Refer to AUTOMATIC TRANSAXLE .
  4. Remove the input shaft speed sensor connector.
  5. Remove the input shaft speed sensor (A).
    Fig 1: Locating Input Shaft Speed Sensor
    G05116851Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals