LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2007 >> Rondo Base >> Repair and Diagnosis >> Electrical >> Body Electrical >> Body Electrical System >> Windshield Deicer >> Windshield Deicer Switch >> Inspection

Windshield Deicer Switch: Inspection

  1. Disconnect the negative (-) battery terminal.
  2. Remove the lower crash pad switch assembly (A) by using the trim remover tool.
    Fig 1: Identifying Lower Crash Pad Switch Assembly
    G05187911Courtesy of KIA MOTORS AMERICA, INC.
  3. Disconnect the windshield deicer switch connector.
    Fig 2: Identifying Windshield Deicer Switch Connector
    G05187912Courtesy of KIA MOTORS AMERICA, INC.
  4. Using an ohmmeter, inspect the continuity between the terminals after removing controller.
    Fig 3: Windshield Deicer Switch Connector Terminals Continuity Chart
    G05187913Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals