Sunroof Switch: Inspection

Disconnect the negative (-) battery terminal.
Open the sunglass case cover from the overhead console then remove the 2 screws holding the overhead console. Disconnect the switch connector (6P) and Map lamp connector, and then remove the overhead console lamp (A).

Fig 1: Identifying Overhead Console Lamp With Screws
Courtesy of KIA MOTORS AMERICA, INC.
Check for continuity between the terminals. If the continuity is not as specified, replace the sunroof switch.

Fig 2: Identifying Sunroof Switch Connector Terminal
Courtesy of KIA MOTORS AMERICA, INC.

Fig 3: Sunroof Switch Continuity Chart
Courtesy of KIA MOTORS AMERICA, INC.