LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2007 >> Rondo Base >> Repair and Diagnosis >> Electrical >> Body Electrical >> Body Electrical System >> Keyless Entry And Burglar Alarm >> Inspection >> Key Warning Switch

Key Warning Switch

  1. Remove the crash pad lower panel. (Refer to CRASH PAD )
  2. Disconnect the 6P connector from the key warning switch.
    Fig 1: Identifying Key Warning Switch 6P Connector
    G05187748Courtesy of KIA MOTORS AMERICA, INC.
  3. Check for continuity between the terminals in each position according to the table.
    Fig 2: Key Warning Switch 6P Connector Terminals Continuity Chart
    G05187749Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals