LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2007 >> Rondo Base >> Repair and Diagnosis >> Electrical >> Body Electrical >> Body Electrical System >> Immobilizer Control System >> DTC P1690 SMARTRA No Response >> Monitor SCANTOOL Data

Monitor SCANTOOL Data

  1. Connect scantool to Data Link Connector (DLC).
  2. IGN "ON" & Engine "OFF".
  3. Monitor the "KEY STATUS" and "ECU STATUS' Parameter on the Scantool.

    ■ Specification : 'LEARNT'

    Fig 1: Scan Tool Display - CURRENT DATA
    G04806670Courtesy of KIA MOTORS AMERICA, INC.
  4. Are "KEY STATUS" and "ECU STATUS' Parameter within specifications?

    YES 

    Check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.

    NO 

    Go to "TERMINAL AND CONNECTOR INSPECTION " procedure.

scientia non olet · About LEMON Manuals