LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2007 >> Rondo Base >> Repair and Diagnosis >> Brakes >> Traction Control >> Abs (Anti-Lock Brake System) >> DTC C2112 Valve Relay Error >> Monitor Actuation Test

Monitor Actuation Test

  1. Connect scantool to Data Link Connector (DLC)
  2. Ignition "ON" & Engine "OFF".
  3. Select the "Actuation Test" mode on the scantool.
  4. Inspect operating status of all valves with Actuation Test.

    Specification : It's normal if operating sound is heard.

    Fig 1: Scantool Screen Display - ACTUATION TEST
    G05187602Courtesy of KIA MOTORS AMERICA, INC.
  5. Do all valves operate normally?

    YES 

    • Fault is intermittent caused by poor connection in power harness (ABS1) and/or HECU's connector or was repaired and HECU memory was not cleared. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.

    NO 

scientia non olet · About LEMON Manuals