DTC C1611 Can Time-Out Ems: DTC Detecting Condition
DTC DETECTION CONDITION AND POSSIBLE CAUSE
| Item |
Detecting Condition |
Possible cause |
| DTC Strategy |
|
- Faulty PCM (ECM)
- Faulty HECU
|
| Detect Mode |
- Outside the ABS control cycle
- Inside the ABS control cycle
- Diagnosis mode
- Failure mode
|
| Enable Conditions |
- In case that EMS1 or EMS2 message was not received for more than 500ms within normal voltage condition.
- The Monitoring starts 2000 ms after Power Up.
|
| Fail Safe |
- Inhibit the ESC control and allow the ABS/EBD control. Meanwhile, stop checking the ESC switch failure under the ESC control.
|