LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2007 >> Rondo Base >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> DTC Troubleshooting Procedures (2 Of 2) - 2.4L >> DTC P2101 Throttle Actuator Control Motor Circuit Range/Performance >> Component Inspection >> Notes

Component Inspection: Notes

NOTE: It is necessary to perform the TPS adaptation procedure with Scan tool when the throttle body assembly or ECM is replaced.

■ TPS adaptation procedure

  1. Erase previous TPS adaptation value using Scan tool.
  2. Ignition "OFF" and then "ON" without cranking. Wait for 10 seconds under enable conditions
    • Enable conditions : Battery >10V & Intake Air Temp. >5.3°C (41.5°F) & 5.3°C (41.5°F) < Engine Coolant Temp. < 99.8°C (211.6°F)
  3. After TPS adaptation, the system normality should be confirmed by reading out "FMY" on the Scan Tool
scientia non olet · About LEMON Manuals