LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2007 >> Rondo Base >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> DTC Troubleshooting Procedures (1 Of 2) - 2.4L >> DTC P0122 Throttle/Pedal Position Sensor/Switch "A" Circuit Low Input >> Signal Circuit Inspection

Signal Circuit Inspection

NOTE: Check for open or short circuit in harness. Refer to "SIGNAL WAVEFORM & DATA " in the "General Information" procedure
  1. Measure voltage between terminal 4 of the sensor harness connector and chassis ground

    Specification : Approx. 5V

  2. Is voltage within the specification?

    YES 

    NO 

scientia non olet · About LEMON Manuals