LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2007 >> Rondo Base >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> DTC Troubleshooting Procedures (1 Of 2) - 2.4L >> DTC P0122 Throttle/Pedal Position Sensor/Switch "A" Circuit Low Input >> DTC Detecting Condition

DTC P0122 Throttle/Pedal Position Sensor/Switch "A" Circuit Low Input: DTC Detecting Condition

DTC DETECTING CONDITION CHART

Item Detecting Condition Possible Cause
DTC Strategy
  • Voltage range check
  • Open in power supply harness
  • Short to ground in power supply or signal harness
  • Poor connection or damaged harness
  • Faulty TPS1
Enable Conditions
  • Ignition "ON"
Threshold Value
  • TPS1 < 0.12V
Diagnostic Time
  • 0.05 sec.
Limp-Home
  • Forced limited power mode: When the DTC is set, the ECM reduces engine torque by 25% of normal value.
  • The ECM uses TPS2 signal to monitor the controlled opening angle of the throttle valve.
MIL On Condition
  • 1 Driving Cycle