LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2007 >> Rio SX, Standard >> Repair and Diagnosis >> Electrical >> Charging Systems >> On-Vehicle Inspection >> Inspect Drive Belt

Inspect Drive Belt

  1. Visually check the belt for excessive wear, frayed cords etc. If any defect has been found, replace the drive belt.
    NOTE: Cracks on the rib side of a belt are considered acceptable. If the belt has chunks missing from the ribs, it should be replaced.
    Fig 1: Identifying Defective Drive Belt
    G04804085Courtesy of KIA MOTORS AMERICA, INC.
  2. Measure the drive belt tension and adjust it.

    Apply a force of 98N (10kg, 22lb), and measure the deflection between the generator and the water pump pulley.