Section 6 (Starting System): Starter: Removal
WARNING: This page is about a different car, the 2007 Kia Sedona and 2006 Kia Sedona. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the battery negative cable.
- Disconnect the starter cable (A) from the B terminal (B) on the solenoid (C), then disconnect the connector (D) from the S terminal (E).
- Remove the 2 bolts holding the starter, then remove the starter.
- Installation is the reverse of removal.
- Connect the battery negative cable to the battery.