Front Hub / Knuckle: Installation

WARNING: This page is about a different car, the 2007 Kia Sedona and 2006 Kia Sedona. However, it is still accessible from the selected car via links, so may be relevant.

Installation is the reverse of removal.
CAUTION:
- The driveshaft lock nut should be replaced with new ones.
- After installation driveshaft lock nut, stake the lock nut using a chisel and hammer as shown in the illustration below.
Fig 1: Staking Driveshaft Lock Nut
Courtesy of KIA MOTORS AMERICA, INC.

Fig 2: Identifying Driveshaft Lock Nut
Courtesy of KIA MOTORS AMERICA, INC.