Water Pump

Install the water pump.
1. Install the water pump (C) and a new gasket with the 3 bolts (B).
  Tightening torque :
  
  11.8~14.7N.m (1.2~1.5kgf.m, 8.7~10.8lb-ft)
  
  Fig 1: Identifying Water Pump And Bolts
  Courtesy of KIA MOTORS AMERICA, INC.
2. Install the alternator brace (D) with the 2 bolts (A).
  Tightening torque :
  
  19.6~26.5N.m (2.0~2.7kgf.m, 14.5~19.5lb-ft)
Install the timing belt idler.
Install the timing belt. (Refer to INSTALLATION )
Install the water pump pulley.
Install the drive belts.
Tighten the water pump pulley bolts.
Tightening torque :

7.8~9.8N.m (0.8~1.0kgf.m, 5.8~7.2lb-ft)
Fill with engine coolant.
Start engine and check for leaks.
Recheck engine coolant level.