Transmitter Code Registration

Connect the DLC cable of hi-scan to the data link connector (16 pins) in driver side crash pad lower panel, turn the power on hi-scan.

Fig 1: Connecting Hi-Scan To Data Link Connector
Courtesy of KIA MOTORS AMERICA, INC.
Select the vehicle model and then do "CODE SAVING".

Fig 2: Identifying Scan Tool Display - CODE SAVING
Courtesy of KIA MOTORS AMERICA, INC.
After selecting "CODE SAVING" menu, push "ENTER" key, then the screen will be shown as below.

Fig 3: Identifying Scan Tool Display - TRANSMITTER CODE SAVE (1 Of 5)
Courtesy of KIA MOTORS AMERICA, INC.
After removing the ignition key from key cylinder, push "ENTER" key to proceed to the next mode for code saving. Follow steps 1 to 4 and then code saving is completed.

Fig 4: Identifying Scan Tool Display - TRANSMITTER CODE SAVE (2 Of 5)
Courtesy of KIA MOTORS AMERICA, INC.

Fig 5: Identifying Scan Tool Display - TRANSMITTER CODE SAVE (3 Of 5)
Courtesy of KIA MOTORS AMERICA, INC.

Fig 6: Identifying Scan Tool Display - TRANSMITTER CODE SAVE (4 Of 5)
Courtesy of KIA MOTORS AMERICA, INC.

Fig 7: Identifying Scan Tool Display - TRANSMITTER CODE SAVE (5 Of 5)
Courtesy of KIA MOTORS AMERICA, INC.