Wheel Alignment: Toe: [Rear]
WARNING: This page is about a different car, the 2007 Kia Sedona and 2006 Kia Sedona. However, it is still accessible from the selected car via links, so may be relevant.
Standard value:
Toe-in (B-A) mm (in): 3.5 ± 2 (0.1378 ± 0.0787)
Adjust the toe-in by turning the cambolt of the assist arm.
Left cambolt: Clockwise → toe-in
Right cambolt: Clockwise → toe-out
The variation of toe by a rotation of the cambolt:
About 3.2 mm (0.126 in)
CAUTION:
- Each toe should be within ±1 mm (± 0.039 in). If the difference between right and left is not within +2mm (0.079 in), repeat adjustment.
- After adjusting the cambolt, tighten the nut to the specified torque.
Specified torque
90-120 N.m (9-12 kgf.m, 65.1-86.8 lb-ft)