LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2007 >> Optima EX, 2.7 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 57 (Meter) >> Steering Pad Switch >> Installation

Steering Pad Switch: Installation

WARNING: This page is about a different car, the 2006 Lexus IS 350 and 2006 Lexus IS 250. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL STEERING PAD SWITCH ASSEMBLY 
    1. Engage the 4 pins.
    2. Install the steering pad switch assembly with the 2 screws.
      Fig 1: Identifying Steering Pad Switch Assembly With Screws
      G04050059Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Connect the 2 connectors and engage the clamp.
  2. INSTALL STEERING PAD (See  INSTALLATION  ) 
  3. INSTALL NO. 3 LOWER STEERING WHEEL COVER (See  INSTALLATION  ) 
  4. INSTALL NO. 2 LOWER STEERING WHEEL COVER (See  INSTALLATION  ) 
  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
    Fig 2: Identifying Connectors
    G04050060Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. INSPECT STEERING PAD (See  INSTALLATION  ) 
  7. INSPECT SRS WARNING LIGHT (See  DIAGNOSIS SYSTEM  ) 
  8. PERFORM INITIALIZATION 
    NOTE: Some systems need initialization after reconnecting the cable to the negative battery terminal (See INITIALIZATION ).
scientia non olet · About LEMON Manuals